MultiChannel

• Vertical Cladding
  • bays up to 6.1m
  • Bays 6.1m up to 9.0m
• Horizontal Cladding
  • Cladding joints at columns
  • Intermediate connection
• Firewall
• General Engineering Apps
  • Parapet posts
  • Door & Window openings
  • Mezzanine Floors
  • Brickwork Restraints
  • Gable posts
  • Miscellaneous Applications
• Applications
• Construction Details
• Dimensions & References
• Sectional Properties
• Load tables
• Multibeam
• Multideck

Home  >  Multichannel  >  Vertical Cladding

Multichannel Vertical Cladding

Restraints for Bays over 6.1m up to 9.0m
The double strut system is utilised on buildings with bays over 6.1m metres up to 9.0m.

* When wall exceeds 10m in height allow one set of diagonal ties for every 9.0m of height.

Where the insulated panel is only through fixed on one edge trapping an under tongue on the adjacent panel the restraint system shown on this page should be used. These systems have the bottom tube strut replaced with an angle strut and the diagonal tie wire replaced with a rod diagonal.

Where the cladding is clip fixed or fixed in such a way that the cladding can slip, relative to the side rail face please contact our Technical Department.

Maximum rail cross centres are 2m.

Where the weight of the cladding is greater than 0.12 kN/m2 please contact our Technical Department.


Bays over 9.0m
Bays over 9.0m are possible with Multichannel sections, for vertical restraints consult our Technical Department.